Home > WPCC™ Workplace Care Centre Information and Products > First Aid Signage >

First Aid Signage


Talott’s First Aid signs are made to last.  Constructed from sturdy, lightweight, 3 mm Sintra plastic that will never yellow.  To comply with regulations, signs should be mounted in a conspicuous area, above the first aid stations and high enough to be seen from a distance.  Some of the features are:

  • Includes direction.
  • Bilingual (English & French).
  • Four pre-drilled corner-mounting holes.
  • Complies with CSA Standards.


Double-sided First Aid Attendant Sign 8” x 12”

Order Number:
2101DANT

The bilingual (English & French) Double-sided First Aid Attendant Sign Sign 8” x 12” - Designed to be suspended from ceilings.  Is specific only to the identification of the First Aid Attendant.  The sign's best location would be above the First Aid Attendant's office in a highly visible position.

Velcro Adhesive Fasteners are available for mounting on surfaces that should not be drilled.


Single-sided First Aid Station Sign 7.5” x 7.5”




Order Number:
2101FAS

Single-Sided First Aid Station Sign 7.5" x 7.5" - Affix to wall directly above a First Aid Station in large rooms or in a hall where an individual's line-of-sight is directly in front of the First Aid Station. 

For directing individuals to a First Aid Station within your maze, this sign can be rotated to point in the correct direction when secured to a surface.  (ie. Picture shown indicates that the First Aid Station is located to the right).

Velcro Adhesive Fasteners are available for mounting on surfaces that should not be drilled.


V-shaped First Aid Station Sign 8” x 12”



Order Number
:
2101V01

 


The bilingual (English & French) V-shaped First Aid Station Sign 8” x 12” - Designed for hallways where the single-sided sign can’t be seen easily. I.E. First Aid Station is mounted in the center and there isn’t sufficient angle to view a single-sided sign from either the left or right side of the First Aid Station.  head-on.  “T” intersection, or where a flat sign would not be seen by line-of-sight from either the left or right side of the First Aid Station.

Velcro Adhesive Fasteners are available for mounting on surfaces that should not be drilled.


Double-sided First Aid Station Sign 7.5” x 7.5”

Order Number:
2101DS02

 

 

Double-Sided First Aid Station Sign 7.5" x 7.5" are ideal for office and warehouse locations.

As with our Single-Sided First Aid Station Signs, these double-sided signs are designed to direct individuals to the closest First Aid Station in a timely manor without confusion as to it's location.  These signs can be rotated to point in the correct direction.  (ie. Picture shown indicates that the First Aid Station is located to the left).

Typically, these signs are hung from suspended ceilings, you will require the T-Bar Plastic Hook Fasteners indicated below.

These signs are easily identified from a distance of 75 feet (23 meters).


T-Bar Plastic Hook Fastener

Order Number:
2101002

Easy to install and use, the T-Bar Plastic Hook Fastner is designed for hanging First Aid Signage from suspended ceilings.  This hook, when properly installed, will support whatever weight the grid will support, up to 6 pounds.  Test grid strength first.


Note:  For the identification of the Fire Wardens, click here.


Additional Information

Documents and Standards

Back to Top


Copyright 2005 © Health and Safety Boards. All rights reserved.